Installing tile is not enough to show off your new sophisticated design. After the process, you will notice haze all over the tile, which doesn’t look as good as you would imagine. The haze is perfectly normal; it does not indicate you did a bad job.

However, cleaning the recently installed tiles is necessary, so you need to act quickly. Luckily for you, there may be some cleaning options in your house that may help you address this problem.

To learn more about how to clean your newly installed tiles properly, this blog will give you an overview of what to consider before you wash your tiles and how you can do so effectively.

Things to Consider

After figuring out how much tile installation will cost and finally installing it, there are other things you must consider when cleaning your project. Firstly, remember that you will not notice grout haze until a couple of days have passed. This occurs when any residual grout on the tiles dries out and leaves behind a cloudy-looking film of minerals.

Even though it takes a few days for the grout haze to appear, it is crucial to tend to it as soon as possible when it finally shows. Do not start removing the grout haze after more than ten days have passed.

Secondly, before you start cleaning, you should be aware of the type of tile you have and the material it is made from. By doing this, you will not damage the tiles thanks to having the correct cleaning solution for your tile surface. You will already have the best cleaner for your tile floor for future cleaning.

How to Clean Porcelain Tile After Installation?

There are a few ways to clean and leave your porcelain tiles in pristine condition. First, you must have the proper cleaning materials to do the job without harming the tiles.

A homemade solution to grout removal is to use vinegar to clean off the tile surface because vinegar doesn’t harm the tiles but will remove the grout from the surface. Any other acid-based cleaner or vinegar can easily wipe up dust and granules. However, wear gloves while working with these solutions as they will sting if it gets into cuts in your skin.

For bigger jobs, pour half a cup of baking soda into a bottle and mix with a quarter cup of hydrogen peroxide, followed by a drop of dish liquid. Let this solution sit on the tile for 10 minutes, and then scrub it off with a soft sponge. This homemade solution will brighten your tile and remove any grout on the surface.

How to Clean Grout from Tiles After Installation?

As the grout particles dry up, they leave behind a haze that removes that shiny and clean look from your tiles. This is nothing new from tile installation, but you should act quickly to remove this look from your tiles.

Cleaning grout off with vinegar is safe and efficient for porcelain tiles, and combined with warm water and dishwashing soap, it will do the job effortlessly. However, avoid acid cleaners for porous or stone tiles; they can be damaged and will not have the look you want for your surface.

If grout continues to be present after using your soft cleaners, it may be time to look for a commercial cleaner to eradicate the grime easily. Whichever method you are using, remember to follow the proper safety precautions when working with haze and cleaning solutions.

Any tiny haze particles inhaled can lead to an itchy throat or an annoying cough. A good dust mask will help you prevent these particles from causing discomfort.

Superior Tile & Grout Solutions in Florida

Florida Tile & Grout Restoration is a family-owned business with over 10 years of experience. We have a highly skilled team ready to assist you in any project you have in mind. Whether you need tile installation or cleaning, you can count on us to deliver the best quality service. Contact us today for a quote!